Commercial Equipment Repair & Maintenance

We provide reliable repair, installation, and preventive maintenance for commercial foodservice, beverage, refrigeration, ice, cooking, and HVAC equipment throughout the Denver metro area.

Commercial Refrigeration

Repair, installation, and planned care for walk-ins, reach-ins, prep tables, display cases, and related systems.

View Commercial Refrigeration
Walk-In Coolers service illustration

Walk-In Coolers

Service covers temperature performance, evaporator and condenser airflow, fans, drains, doors, gaskets, controls, and refrigeration components. We inspect the system as a whole to identify causes of warm temperatures, leaks, icing, excessive run time, or uneven cooling.

View Service Page
Walk-In Freezers service illustration

Walk-In Freezers

We diagnose freezer temperature, defrost operation, frost and ice buildup, fan performance, drains, doors, heaters, sensors, controls, and refrigeration components. Operating conditions are checked through refrigeration and defrost cycles when applicable.

View Service Page
Reach-In Refrigeration service illustration

Reach-In Refrigeration

We service commercial reach-in coolers and freezers used for dependable cold and frozen storage. Diagnostics can include temperatures, airflow, coils, fans, compressor operation, electrical controls, gaskets, doors, drains, and defrost components.

View Service Page
Undercounter Refrigeration service illustration

Undercounter Refrigeration

Compact undercounter units work hard in bars, kitchens, prep stations, and other tight spaces. We evaluate cooling, airflow, controls, coils, fans, doors, gaskets, drains, and refrigeration performance while accounting for installation clearance and operating conditions.

View Service Page
Prep Tables service illustration

Prep Tables

Refrigerated prep tables depend on balanced airflow and properly sealed storage areas to hold ingredients at the right temperature. Service can include pans and rails, drawers, doors, gaskets, controls, fans, coils, drains, and refrigeration components.

View Service Page
Display Cases service illustration

Display Cases

We service refrigerated merchandisers and display cases that protect both product temperature and presentation. Inspection can include airflow, evaporator and condenser components, fans, controls, doors, seals, drains, defrost operation, lighting, and case temperature consistency.

View Service Page
Ice Cream / Frozen-Food Merchandisers service illustration

Ice Cream / Frozen-Food Merchandisers

We service commercial ice cream and frozen-food merchandisers used to keep packaged frozen products at safe, consistent temperatures. Diagnostics can include cabinet temperature, airflow, coils, fans, doors or lids, gaskets, defrost components, controls, lighting, and refrigeration performance.

View Service Page
Open-Air Refrigerated Merchandisers service illustration

Open-Air Refrigerated Merchandisers

Open-air refrigerated merchandisers rely on a stable air curtain, clean coils, proper fan operation, drainage, controls, and refrigeration performance. We diagnose warm product zones, icing, airflow problems, water leaks, temperature drift, and other operating issues.

View Service Page
Refrigeration Installation service illustration

Refrigeration Installation

For qualifying new and replacement systems, we review equipment requirements, site conditions, connections, clearances, drainage, controls, and related trade coordination. Installation includes start-up checks and operating verification before the equipment is placed into service.

View Service Page

Commercial HVAC

Repair and preventive maintenance for commercial heating, cooling, ventilation, and climate-control systems.

View Commercial HVAC
Rooftop Units (RTUs) service illustration

Rooftop Units (RTUs)

We service and repair commercial rooftop units (RTUs) for heating, cooling, airflow, electrical, and control problems. Our diagnostics cover the complete system—including compressors, coils, fans, belts, economizers, gas heat, thermostats, safeties, and controls—to identify the cause of the problem and restore proper operation.

View Service Page
Split Systems service illustration

Split Systems

Commercial ducted split-system service can include outdoor condensing units, indoor air handlers or furnaces, refrigerant circuits, compressors, coils, fan motors, metering devices, drains, electrical components, thermostats, and controls. We evaluate both indoor and outdoor sections to find the cause of poor heating or cooling performance.

View Service Page
Ductless Mini-Split Systems service illustration

Ductless Mini-Split Systems

Ductless mini-split repair, troubleshooting, preventive maintenance, and installation for offices, retail spaces, restaurants, and other commercial properties. We service indoor units and outdoor condensers, including single-zone and multi-zone systems, to address poor heating or cooling, airflow problems, water leaks, fault codes, and control issues.

View Service Page
Heat Pumps service illustration

Heat Pumps

We diagnose commercial heat pumps in both heating and cooling modes, including compressors, reversing valves, defrost operation, coils, fan motors, sensors, electrical components, controls, and refrigerant performance. Operation is checked through the appropriate mode and sequence when site conditions allow.

View Service Page
Air Handlers (AHUs) service illustration

Air Handlers (AHUs)

Air-handler service can include blowers, motors, belts, bearings, filters, coils, dampers, drain pans, condensate drains, sensors, electrical components, and controls. We check airflow and component operation to identify causes of weak airflow, noise, water problems, or poor space conditioning.

View Service Page
Make-Up Air Units (MAUs) service illustration

Make-Up Air Units (MAUs)

We service qualifying make-up air units including intake sections, filters, blowers, motors, belts, dampers, heating components, safeties, electrical components, and controls. Proper operation is evaluated along with airflow and the relationship between replacement air and the building exhaust system.

View Service Page
Exhaust Fans & Ventilation service illustration

Exhaust Fans & Ventilation

Commercial exhaust and ventilation service can include fan motors, belts, bearings, wheels, electrical components, controls, vibration, noise, and airflow. We diagnose weak exhaust, intermittent operation, shutdowns, and mechanical or electrical failures on qualifying systems.

View Service Page
Commercial Furnaces & Unit Heaters service illustration

Commercial Furnaces & Unit Heaters

Heating service can include burners, ignition components, gas valves, flame proving, safeties, heat exchangers, blower assemblies, venting, electrical components, thermostats, and controls. We follow the heating sequence to identify no-heat, lockout, cycling, airflow, and ignition problems.

View Service Page
Thermostats & HVAC Controls service illustration

Thermostats & HVAC Controls

Control diagnostics can include 24-volt power, thermostats, zone sensors, relays, contactors, control boards, safeties, wiring, and heating or cooling calls. We trace the control sequence to determine why equipment is not receiving or responding correctly to a call for operation.

View Service Page
HVAC Repair and Diagnostics service illustration

HVAC Repair and Diagnostics

We evaluate temperatures, airflow, motors, fans, electrical components, controls, coils, heating and cooling operation, and site conditions to identify the source of commercial HVAC problems before recommending repair.

View Service Page

Ice Machines

Repair, cleaning, descaling, installation, and maintenance for commercial ice makers, dispensers, and bins.

View Ice Machines
Commercial Ice Machine Repair service illustration

Commercial Ice Machine Repair

Repair service starts with a complete check of water delivery, freeze and harvest cycles, sensors, controls, refrigeration components, bin controls, and drainage. We identify why the machine has stopped, is producing slowly, leaking, or making poor-quality ice before recommending repair.

View Service Page
Ice Machine Installation service illustration

Ice Machine Installation

We review machine and bin compatibility, electrical requirements, water supply, filtration, drain routing, clearances, ventilation, and site conditions. Installation includes connection checks, leveling, start-up, cycle verification, and confirmation that the machine is producing and harvesting ice correctly.

View Service Page
Ice Machine Cleaning and Descaling service illustration

Ice Machine Cleaning and Descaling

Cleaning and descaling remove mineral buildup and residue from the water system, evaporator, trough, distribution components, and removable parts using equipment-appropriate procedures. Components are rinsed and reassembled, and operation is checked after the cleaning cycle.

View Service Page
Ice Machine Preventive Maintenance service illustration

Ice Machine Preventive Maintenance

The maintenance procedure includes a wash cycle with approved ice machine cleaner, as well as cleaning all parts and inspecting the evaporator plate for separation. It involves checking and cleaning the sump trough, adjusting its water level, and inspecting the float valve and flush solenoid for leaks and proper activation. The unit is checked for water, refrigerant, and oil leaks, and the water curtain activator switch is inspected. Adjustments are made to the probe assist length, bin switch, cam switch, and cycle times for freeze and defrost. Ice bridge thickness is checked, and the flaker chute, spout, and proximity switch are inspected. The gear motor and auger housing are examined, the water circuit is checked, bin controls, hopper, and dispenser are tested, and the RTU condenser coils are brushed.

View Service Page

Beverage Equipment

Service for fountain, frozen, juice, nitro cold brew, and commercial beverage dispensing systems.

View Beverage Equipment
Soda Fountains service illustration

Soda Fountains

We inspect water and syrup delivery, carbon dioxide pressure, chilling, ratio settings, pumps, valves, nozzles, controls, and drainage. Service is focused on finding the cause of drinks that are warm, flat, too weak or strong, slow to dispense, or leaking.

View Service Page
Slurpee and Slush Machines service illustration

Slurpee and Slush Machines

Service can include refrigeration performance, freeze controls, bowls or cylinders, augers and drive components, product delivery, seals, dispensing valves, and drainage. We diagnose machines that will not freeze, over-freeze, recover slowly, leak, or produce an inconsistent texture.

View Service Page
Frozen Beverage Machines service illustration

Frozen Beverage Machines

We evaluate refrigeration, viscosity and freeze settings, product and water supply, pumps, motors, controls, pressure, and dispensing components. Operating cycles are checked to identify causes of poor consistency, slow recovery, freeze-up, or interrupted dispensing.

View Service Page
Juice Dispensers service illustration

Juice Dispensers

We check cooling, concentrate and water flow, ratio settings, pumps, valves, mixing components, tubing, nozzles, controls, and drains. This complete approach helps isolate warm, weak, strong, intermittent, or leaking beverage conditions.

View Service Page
Nitro Cold Brew Systems service illustration

Nitro Cold Brew Systems

Nitro service covers refrigeration, product and gas lines, nitrogen pressure and regulation, fittings, faucets, and draft balance. We inspect the complete system when cold brew is warm, flat, overly foamy, slow to pour, or leaking.

View Service Page
Iced Coffee Dispensers service illustration

Iced Coffee Dispensers

We service commercial iced coffee dispensing equipment including product delivery, cooling, pumps, valves, tubing, controls, dispensing points, and drainage. Diagnostics focus on warm product, weak or inconsistent flow, leaks, dispensing failures, and temperature-control problems.

View Service Page
Beverage Equipment Installation service illustration

Beverage Equipment Installation

Before installation, we review the equipment, site, water and filtration, carbon dioxide or nitrogen supply, electrical requirements, drainage, ventilation, and clearances. Connections, operating settings, product delivery, and start-up performance are verified before handoff.

View Service Page

Coffee and Tea Equipment

Repair, installation, descaling, filtration, and maintenance for commercial hot beverage equipment.

View Coffee and Tea Equipment

Commercial Cooking Equipment

Focused service for rapid-cook ovens, commercial ovens, roller grills, warming displays, and hot holding equipment.

View Commercial Cooking Equipment
Rapid-Cook Ovens service illustration

Rapid-Cook Ovens

We diagnose heating systems, fans and airflow, controls, sensors, interlocks, doors, latches, and gaskets on qualifying rapid-cook equipment. Service targets error codes, slow or uneven cooking, temperature problems, fan issues, and units that will not start.

View Service Page
Commercial Ovens service illustration

Commercial Ovens

Oven service can include heating elements, fans, thermostats, sensors, controls, wiring, doors, hinges, latches, and gaskets. We check temperature accuracy and recovery to identify causes of no heat, uneven heat, long cook times, or repeated shutdowns.

View Service Page
Roller Grills service illustration

Roller Grills

We inspect rollers, drive motors and gears, heating zones, thermostats, controls, wiring, and related mechanical components. Diagnostics address rollers that stop turning, cold spots, uneven heat, unusual noise, and intermittent operation.

View Service Page
Warming Displays service illustration

Warming Displays

Service covers heating elements, thermostats, sensors, fans and airflow, controls, lighting, shelves, doors, and seals. We diagnose displays that will not reach or maintain temperature, heat unevenly, shut down, or develop control problems.

View Service Page
Chili & Cheese Dispensers service illustration

Chili & Cheese Dispensers

We service qualifying commercial chili and cheese dispensers including heating systems, pumps or dispensing mechanisms, temperature controls, switches, wiring, product delivery components, and related safety controls. Service addresses no-heat, poor dispensing, temperature problems, leaks, and intermittent operation.

View Service Page
Steam Tables service illustration

Steam Tables

Steam table service can include heating elements, wells, thermostats, switches, wiring, controls, drains, and water-related components. We diagnose units that do not heat, heat unevenly, run too hot or too cool, leak, or fail to maintain proper holding temperature.

View Service Page

Water Filtration

Installation, filter changes, inspections, and scale-prevention support for commercial equipment water systems.

View Water Filtration

Preventive Maintenance

Scheduled maintenance programs for commercial equipment and water filtration.

View Preventive Maintenance

Equipment Support

Repair, Installation & Preventive Maintenance

Diagnostics, equipment repairs, installations, scheduled maintenance, cleaning, descaling, filter changes, and flexible emergency scheduling for equipment within our service scope.

  • Repair
  • Installation
  • Preventive maintenance
View Maintenance Programs

Residential HVAC Service

Residential Heating & Cooling Repair

Professional troubleshooting and repair for residential heating and air-conditioning systems. We diagnose and repair no-heat and no-cooling problems to help restore comfort to your home.

No heat / heating failures
No cooling / air-conditioning failures

Need your home HVAC system checked?

Tell us whether the issue is heating or cooling, what the system is doing, and when the problem started.